2 Channels
Terminal block detail
Installation with digital time switch
Installation with water heater contactor
TECHNICAL CHARACTERISTICS
Rated voltage: 230VAC single phase 50Hz
Voltage range: 205 - 260VAC
Frequency range: 48 to 60 Hz
Maximum allowable current in measurement: 80A (18,000W at 220V)
Consumption at rest: 27 mW (at 240VAC)
Transfer rate: 99.7% (at maximum power)
Maximum load: 600A for 10ms
S1 load: 100 to 3000W, resistive load only, variable output (1% to 100%)
S2 load (can be simultaneous with S1 load): 100 to 3000W, resistive load only, variable output (1% to 100%)
Maximum current: 13A per output : 2 x 3000W
Routing accuracy : 10 to 30W
Boost function: 120 minutes of power supply at full power to outputs S1 or S2 or S1 and S2
Clock or contactor function: the position of jumper H on the electronic board determines whether S1 or S1 and S2 will be powered during the programmed hours
Operating temperature: 0 to 60°C
Storage temperature: -20 to +75°C
Humidity: 10 to 85% non-condensing. Indoor installation only
Insulation: Transformer: 2.5 kV - Optocouplers: 3.75 kV - Probe: 6 kW
Maximum power dissipated at 3 Kw: 20W per output
Internal fuse: 250V 100mA
Total dimensions: 150mm x 114mm x 48mm - Integrated heatsink of 150mm x 100mm x 15mm